Siga
| Siga/samfuri | XLB-DQ 350×350×2 | XLB-DQ 400×400×2 | XLB-DQ 600×600×2 | XLB-DQ 750×850×2(4) |
| Matsi (Ton) | 25 | 50 | 100 | 160 |
| Girman faranti (mm) | 350×350 | 400×400 | 600×600 | 750×850 |
| Hasken Rana (mm) | 125 | 125 | 125 | 125 |
| Yawan hasken rana | 2 | 2 | 2 | 2(4) |
| bugun fistan (mm) | 250 | 250 | 250 | 250(500) |
| Matsin yanki na yanki (Mpa) | 2 | 3.1 | 2.8 | 2.5 |
| Motoci (kw) | 2.2 | 3 | 5 | 7.5 |
| Girman (mm) | 1260×560×1650 | 2400×550×1500 | 1401×680×1750 | 1900×950×2028 |
| Nauyi (KG) | 1000 | 1300 | 3500 | 6500(7500) |
| Siga/samfuri | XLB- 1300×2000 | XLB- 1200×2500 | XLB 1500×2000 | XLB 2000×3000 |
| Matsi (Ton) | 5.6 | 7.5 | 10 | 18 |
| Girman faranti (mm) | 1300×2000 | 1200×2500 | 1500×2500 | 2000×3000 |
| Hasken Rana (mm) | 400 | 400 | 400 | 400 |
| Yawan hasken rana | 1 | 1 | 1 | 1 |
| bugun fistan (mm) | 400 | 400 | 400 | 400 |
| Matsin yanki na yanki (Mpa) | 2.15 | 2.5 | 3.3 | 3 |
| Motoci (kw) | 8 | 9.5 | 11 | 26 |
| Girman (mm) | 2000×1860×2500 | 2560×1700×2780 | 2810×1550×3325 | 2900×3200×2860 |
| Nauyi (KG) | 17000 | 20000 | 24000 | 66000 |
Aikace-aikace:
XLB jerin farantin vulcanizing latsa don roba ne babban gyare-gyaren kayan aiki ga daban-daban na roba gyare-gyaren kayayyakin da kuma wadanda ba gyare-gyaren kayayyakin, The kayan aiki ne kuma dace da gyare-gyaren zuwa Thermos saitin filastik, kumfa, resins, Bakelite, sheet karfe, ginin kayan da sauran gyare-gyaren kayayyakin, tare da sauki tsari, high matsa lamba, m applicability, da kuma high dace.
Gudun aikin injin
Matsayi na farko → Saka kayan a cikin mold, sake saita silinda ejector → Load da mold → Rufe mold da sauri → Matsar da mold a hankali, ƙara matsa lamba → Ƙarfafawa → Ƙarƙashin haɓakawa → Ƙarshen ƙura → Buɗe mold da sauri → Fitar da mold → Ejector Silinda yana aiki, kuma raba samfurin da samfurin .
Babban Siffofin
1.The Silinda (piston) yana ɗaukar tsarin hatimi mafi kyau, tare da ƙira mai ma'ana da aiki mai dogara. Sashin hatimi yana da inganci mai kyau YX nau'in nau'in nau'in polyurethane (ba hatimin roba ba), wanda yake jurewar mai, juriya tsufa
2.Automatic iko: atomatik mold rufe, atomatik m, atomatik dumama da kuma ci gaba da barga zafin jiki, ta atomatik lokaci ga vulcanization, atomatik ƙararrawa, atomatik mold bude, da dai sauransu
3..The vulcanizing zafin jiki za a iya saita da kuma nuna a cikin dijital displan.
4.Vulcanizing lokaci za a iya saita a cikin PLC allon. Idan kana son zafi da vulcanize na minti 1, kawai saita shi kai tsaye. Lokacin da ya kai 1minutes, na'ura za ta ƙararrawa sannan injin zai buɗe mold ta atomatik
5.Pillar da aka yi da high quality # 45 karfe, The taurin, sa juriya da abrasive juriya ne high inganta ta quenching da tempering.
6.A saman katako da nau'in faranti na ƙasa an welded tare da kyakkyawan ingancin Q-235A ductile iron .Bayan waldi, ana kuma sarrafa shi ta hanyar girgizar wucin gadi ko babban zafin jiki na tsufa, don kawar da damuwa na ciki da kuma guje wa nakasawa.
7.plunger an yi shi da LG-P sanyi ƙarfi gami karfe. Surface na shi mallaki high taurin da kuma sa resistant. Zurfin chilled Layer ne 8-15mm , taurin ne HRC 60-70 , yin plunger kansa dogon rai lokaci .
